People also ask
How to reset cisco air cap3602i a K9?
How do i reset my cisco air cap3602i a k9?
1
Locate the reset button on the back of the access point.
2
Using a paperclip or a similar object, press and hold the reset button for approximately 10 seconds.
3
Release the reset button after 10 seconds. The access point will reboot and restore the factory default settings.
How to reset cisco air cap3502i n K9?
You need to do the following: Turn your access point on (preferably with POE) and hold the "mode" button until the light begins to blink orange. You can now let go. Wait about 10 - 15 seconds and plug in your console cable.
How to reset cisco air cap?
Here is the procedure:
1
Disconnect power from the AP or Disconnect the power jack for external power or the Ethernet cable for inline power.
2
Press and hold the MODE button while you reconnect power to the AP.
3
Hold the MODE button until the Status LED turns amber, and then release the button.
I am guessing that from the error message I am getting, I need to configure the controller with the same IP setting the AP has already. So, my question is, is ...
Missing: انیپکو? q= ressis. product/
I can't get them to reset to factory settings! I've followed the instructions in the product sheet using the Mode button to perform a "hard reset" to factory ...
Missing: انیپکو? q= ressis.
Solved: Hi guys finally got my vWLC working and now I'm stuck with these Lightweight AP's that don't want to join. I got 3 all same models except one is ...
Missing: انیپکو? ressis. net/
In order to show you the most relevant results, we have omitted some entries very similar to the 8 already displayed.
If you like, you can repeat the search with the omitted results included. |